|
|
Faculdade de Engenharia Mecânica
Departamento de Engenharia de Manufatura e Materiais
Produções / Artigos publicados em periódicos
Artigos publicados em periódicos especializados arbitrados
Circulação Nacional
1.
|
|
FARIA, J. D.; BRITO, C. C.; COSTA, T. A. P. S.; VERISSIMO, N. C.; SANTOS, W. L. R.; DIAS FILHO, J. M. S.; GARCIA, Amauri; CHEUNG, N.; Influência na microestrutura e na microdureza decorrente da adição de 4%Ag na liga Al-4%Cu solidificada unidirecionalmente, 12/2015, Matéria (UFRJ),Vol. 20, Fac. 4, pp.992-1007, Rio de Janeiro, RJ, Brasil, 2015
|
Circulação Internacional
1.
|
|
CHEUNG, N.; GARCIA, Amauri; COSTA, T. A. P. S.; FREITAS, E. S. F.; DIAS FILHO, J. M. S.; BRITO, C. C.; Monotectic Al-Bi-Sn alloys directionally solidified: Effects of Bi content, growth rate and cooling rate on the microstructural evolution and hardness, 12/2015, Journal of Alloys and Compounds,Vol. 653, pp.243-254, Lausanne, Suiça, 2015
|
2.
|
|
VERISSIMO, N. C.; GEILICH, B. M.; OLIVEIRA, H. G.; CARAM JR., Rubens; WEBSTER, T. J.; Reducing S taphylococcus aureus growth on Ti alloy nanostructured surfaces through the addition of Sn, 12/2015, Journal of Biomedical Materials Research (Print) (Cessou em 2002. Cont. 1549-3296 Journal of Biomedical Materials Research. Part A),Vol. 103, Fac. 12, pp.3757-3763, New York, Estados Unidos da América, 2015
|
3.
|
|
NADAL, R. L.; ROCA, A.S.; FALS, Hipolito Domingo C; ZOQUI, EUGENIO JOSE; Mechanical properties of thixoformed hypoeutectic gray cast iron, 12/2015, Journal of Materials Processing Technology,Vol. 226, pp.146-156, Amsterdam, Holanda, 2015
|
4.
|
|
MCCOLSKEY, J. D.; SOWARDS, J. W.; HEROLD, T. G.; PEREIRA, V. F.; LONDONO, A. J. R.; Characterization of mechanical properties, fatigue-crack propagation, and residual stresses in a microalloyed pipeline-steel friction-stir weld, 12/2015, Materials & Design,Vol. 88, pp.632-642, Oxford, Reino Unido, 2015
|
5.
|
|
GABRIEL, S. B.; DILLE, J.; REZENDE, M. C.; ALMEIDA, L. H.; BALDAN, Renato; NUNES, Carlos Angelo; MEI, Paulo Roberto; Mechanical Characterization of Ti?12mo?13nb Alloy for Biomedical Application Hot Swaged and Aged, 12/2015, Materials Research (São Carlos. Impresso),Vol. 18, pp.8-12, São Carlos, SP, Brasil, 2015
|
6.
|
|
RAMOS, W.S.; BLÁS, J.C.G.; CARAM, R.; TAVARES, A M G; LOPES, É. S. N.; CARAM JR., Rubens; BATISTA, WILTON WALTER; SOUZA, S. A. S. A.; LOPES, E. S. N.; Influence of Si addition on the microstructure and mechanical properties of Ti-35Nb alloy for applications in orthopedic implants, 11/2015, Journal of the Mechanical Behavior of Biomedical Materials (Print),Vol. 51, pp.74-87, Amsterdam, Holanda, 2015
|
7.
|
|
MARTINS, M. M.; BUTTON, Sergio Tonini; Analysis of Aluminium Hot Extrusion by Finite Volume Method, 11/2015, Materials Today: Proceedings,Vol. 2, Fac. 10, pp.4740-4747, Amsterdam, Holanda, 2015
|
8.
|
|
ANHOLON, R.; NOVASKI, Olivio; ORDONEZ, R. E. C.; PINTO, J,S., JEFFERSON DE SOUZA PINTO; BESTEIRO, É. N. C.; PROPOSTA DE MODELO PARA USO DA CORRENTE CRÍTICA NO GERENCIAMENTO DO TEMPO EM MÚLTIPLOS PROJETOS, 11/2015, MundoPM: Project Management,Vol. 11, pp.28-42, Rio de Janeiro, RJ, Brasil, 2015
|
9.
|
|
LEAL, C. V.; MARTINEZ, D. S. T.; ESPOSITO, A. R.; MÁS, B. A.; MORAES, A. C. M.; ALVES, O.L.; DUEK, Eliana; CHARACTERIZATION AND IN VITRO EVALUATION OF POLY (L-LACTIC ACID) AND PURIFIED MULTIWALLED CARBON NANOTUBES NANOCOMPOSITES, 11/2015, Química Nova (Impresso),Vol. 38, Fac. 9, pp.1153-1161, São Paulo, SP, Brasil, 2015 *
|
10.
|
|
MEI, Paulo Roberto; MARINHO, Ricardo R.; DIAZ, J. A. Á.; RUCHERT, C. O. F. T.; MARINHO, R.R.; PAES, M. T. P.; LONDONO, A. J. R.; Fracture toughness assessment at different temperatures and regions within a friction stirred API 5L X80 steel welded plates, 10/2015, Engineering Fracture Mechanics,Vol. 147, pp.176-186, Oxford, Reino Unido, 2015
|
11.
|
|
SANTOS, W. L. R.; BRITO, C. C.; BERTELLI, F.; SPINELLI, J. E.; GARCIA, Amauri; Microstructural development of hypoeutectic Zn-(10-40)wt%Sn solder alloys and impacts of interphase spacing and macrosegregation pattern on hardness, 10/2015, Journal of Alloys and Compounds,Vol. 647, pp.989-996, Lausanne, Suiça, 2015
|
12.
|
|
SANTOS, M. F. M.; FUJIWARA, E.; SCHENKEL, E. A.; ENZWEILER, Jacinta; SUZUKI, Carlos Kenichi; Quartz sand resources in the Santa Maria Eterna Formation, Bahia, Brazil: A geochemical and morphological study, 10/2015, Journal of South American Earth Sciences,Vol. 62, pp.176-185, Oxford, Reino Unido, 2015 *
|
13.
|
|
MELLO, M. G.; SALVADOR, C. A. F.; CREMASCO, A.; CARAM JR., Rubens; The effect of Sn addition on phase stability and phase evolution during aging heat treatment in Ti–Mo alloys employed as biomaterials, 10/2015, Materials Characterization,Vol. 110, pp.5-13, Amsterdam, Holanda, 2015 *
|
14.
|
|
ANHOLON, R.; SANO, A. T.; Analysis of critical processes in the implementation of lean manufacturing projects using project management guidelines, 09/2015, International Journal, Advanced Manufacturing Technology,Vol. 10, Surrey, Reino Unido, 2015
|
15.
|
|
REINHART, G.; NGUYEN-THI, H.; GARCIA, Amauri; SPINELLI, J. E.; SILVA, B.L.; MANGELINCK-NOËL, N.; SPINELLI, J. E.; Microstructural development and mechanical properties of a near-eutectic directionally solidified Sn-Bi solder alloy, 09/2015, Materials Characterization,Vol. 107, pp.43-53, Amsterdam, Holanda, 2015
|
16.
|
|
GARCIA, Amauri; OSORIO, W. R. R.; PEIXOTO, L. C. L.; Electrochemical and Mechanical Behavior of Lead-Silver and Lead-Bismuth Casting Alloys for Lead-Acid Battery Components, 09/2015, Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science,Vol. 46, Fac. 9, pp.4255-4267, Warrendale, PA, Estados Unidos da América, 2015 *
|
17.
|
|
CHEUNG, N.; GARCIA, Amauri; DIAS FILHO, J. M. S.; COSTA, T. A. P. S.; ROCHA, Otávio Fernandes Lima; SPINELLI, J. E.; Interconnection of thermal parameters, microstructure and mechanical properties in directionally solidified Sn-Sb lead-free solder alloys, 08/2015, Materials Characterization,Vol. 106, pp.52-61, Amsterdam, Holanda, 2015
|
18.
|
|
BERTELLI, F.; CHEUNG, N.; SPINELLI, J. E.; GARCIA, Amauri; BRITO, C. C.; COSTA, T. A. P. S.; BRITO, T. A. V.; SPINELLI, J. E.; Characterization of Dendritic Microstructure, Intermetallic Phases, and Hardness of Directionally Solidified Al-Mg and Al-Mg-Si Alloys, 08/2015, Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science,Vol. 46, Fac. 8, pp.3342-3355, Warrendale, PA, Estados Unidos da América, 2015
|
19.
|
|
BERTELLI, F.; CHEUNG, N.; SPINELLI, J. E.; GARCIA, Amauri; BRITO, C. C.; COSTA, T. A. P. S.; BRITO, T. A. V.; SPINELLI, J. E.; Erratum to: Characterization of Dendritic Microstructure, Intermetallic Phases, and Hardness of Directionally Solidified Al-Mg and Al-Mg-Si Alloys, 08/2015, Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science,Vol. 46, Fac. 8, pp.3786-3788, Warrendale, PA, Estados Unidos da América, 2015
|
20.
|
|
COPPINI, N. L.; ROSA, A. F. C.; CARVALHO, A. A. M.; SOUZA, E. M.; Simulated Annealing Applied to Optimize the Efficiency of Flexible Manufacturing Cells, 07/2015, Applied Mechanics and Materials,Vol. 778, pp.245-258, Stafa-Zurich, Suiça, 2015
|
21.
|
|
ANHOLON, R.; PINTO, J,S., JEFFERSON DE SOUZA PINTO; NOVASKI, Olivio; ZOQUI, EUGENIO JOSE; BESTEIRO, É. N. C.; ORDONEZ, R. E. C.; Micro and Small Enterprises management: main administrative difficulties observed in construction sector enterprises, 07/2015, Brazilian Journal of Operations and Production Management,Vol. 12, pp.88-99, São Paulo, SP, Brasil, 2015
|
22.
|
|
LOIOLA, L. M. D.; MÁS, B. A.; DUEK, Eliana A. de Rezende; FELISBERTI, MI; Amphiphilic multiblock copolymers of PLLA, PEO and PPO blocks: Synthesis, properties and cell affinity, 07/2015, European Polymer Journal,Vol. 68, pp.618-629, Exeter EX1 2AH, Reino Unido, 2015 *
|
23.
|
|
REINHART, G.; NGUYEN-THI, H.; CHEUNG, N.; GARCIA, Amauri; BRITO, C. C.; MANGELINCK-NOËL, N.; SPINELLI, J. E.; High cooling rate cells, dendrites, microstructural spacings and microhardness in a directionally solidified Al-Mg-Si alloy, 07/2015, Journal of Alloys and Compounds,Vol. 636, pp.145-149, Lausanne, Suiça, 2015
|
24.
|
|
LONGHITANO, G. A.; LAROSA, M. A.; MUNHOZ, A. L. J.; ZAVAGLIA, Cecilia Amelia de C; IERARDI, Maria Clara Filippini; Surface Finishes for Ti-6Al-4V Alloy Produced by Direct Metal Laser Sintering, 07/2015, Materials Research (São Carlos. Impresso),Vol. 18, Fac. 4, pp.838-842, São Carlos, SP, Brasil, 2015
|
25.
|
|
COSTA, T. A.; MOREIRA, A. L.; DIAS, M.; GARCIA, A; COSTA, T. A. P. S.; MOUTINHO, D. J. C.; DIAS FILHO, J. M. S.; FERREIRA, I. L.; SPINELLI, J. E.; ROCHA, O. F. L.; GARCIA, Amauri; Growth direction and Si alloying affecting directionally solidified structures of Al-Cu-Si alloys, 07/2015, Materials Science and Technology,Vol. 31, Fac. 9, pp.1103-1112, London, Reino Unido, 2015
|
26.
|
|
ANHOLON, R.; NOVASKI, Olivio; PINTO, J,S., JEFFERSON DE SOUZA PINTO; BESTEIRO, É. N. C.; PROPOSTA DE MÉTODO DE MENSURAÇÃO DA COMPLEXIDADE EM PROJETOS RESUMO, 07/2015, Revista de Gestão e Projetos,Vol. 5, pp.14-29, São Paulo, SP, Brasil, 2015
|
27.
|
|
SALLES, T. H. C.; LOMBELLO, C.B.; DAVILA, M. A.; Electrospinning of Gelatin/Poly (Vinyl Pyrrolidone) Blends from Water/Acetic Acid Solutions, 06/2015, Materials Research (São Carlos. Impresso),Vol. 18, Fac. 3, pp.509-518, São Carlos, SP, Brasil, 2015
|
28.
|
|
THEODORO, M. C.; PEREIRA, V. F.; MEI, Paulo Roberto; LONDONO, A. J. R.; Dissimilar Friction Stir Welding Between UNS S31603 Austenitic Stainless Steel and UNS S32750 Superduplex Stainless Steel, 06/2015, Metallurgical and Materials Transactions. B, Process Metallurgy and Materials Processing Science,Vol. 46, Fac. 3, pp.1440-1447, Materials Park, Estados Unidos da América, 2015
|
29.
|
|
ANHOLON, R.; SILVA, Silva, M.C.; DIFERENCIAIS DO SISTEMA DE GESTÃO DESENVOLVIDO POR UMA INCUBADORA DE EMPRESAS DE REFERÊNCIA, 06/2015, Revista GEINTEC: gestão, inovação e tecnologias,Vol. 5, pp.1864-1880, Itabaiana, SE, Brasil, 2015
|
30.
|
|
SVERZUT, Cássio Edvard; MATOS, F. P.; TRIVELLATO, Alexandre Elias; KATO, R. B; SVERZUT, A. T.; TABA JÚNIOR, M.; DUEK, Eliana; OLIVEIRA, Paulo Tambasco de; DUEK, Eliana A. de Rezende; Histologic and Histometric Analysis of Bone Repair at the Site of Mandibular Body Osteotomy and at the Bone-Screw Interface After Using a Biodegradable 2.0-mm Internal Fixation System, 06/2015, The Journal of Craniofacial Surgery (Print),Vol. 26, Fac. 4, pp.1214-1219, Boston, Estados Unidos da América, 2015 *
|
31.
|
|
CHEUNG, N.; GARCIA, Amauri; SPINELLI, J. E.; Sn–0.7wt%Cu–(xNi) alloys: Microstructure–mechanical properties correlations with solder/substrate interfacial heat transfer coefficient, 05/2015, Journal of Alloys and Compounds,Vol. 632, pp.274-285, Lausanne, Suiça, 2015
|
32.
|
|
CARDOSO, G. B. C.; MANIGLIO, D.; VOLPATO, F. Z.; TONDON, A.; MIGLIARESI, C.; KAUNAS, R. R.; ZAVAGLIA, Cecilia Amelia de C; Oleic acid surfactant in polycaprolactone/hydroxyapatite-composites for bone tissue engineering, 05/2015, Journal of Biomedical Materials Research. Part B, Applied Biomaterials,Vol. 05, New Jersei, Estados Unidos da América, 2015
|
33.
|
|
SILVA, B.L.; SPINELLI, J. E.; CANTÉ, M. V.; BERTELLI, F.; CHEUNG, N.; RIVA, R.; GARCIA, Amauri; Experimental and numerical analyses of laser remelted Sn-0.7 wt% Cu solder surfaces, 05/2015, Journal of Materials Science. Materials in Electronics,Vol. 26, Fac. 5, pp.3100-3107, Norwell, Estados Unidos da América, 2015
|
34.
|
|
BERTELLI, F.; REINHART, G.; NGUYEN-THI, H.; CHEUNG, N.; GARCIA, Amauri; Cooling thermal parameters, microstructure, segregation and hardness in directionally solidified Al–Sn-(Si;Cu) alloys, 05/2015, Materials & Design,Vol. 72, pp.31-42, Oxford, Reino Unido, 2015
|
35.
|
|
OSORIO, W. R. R.; CANTÉ, M. V.; BRITO, C. C.; FEITOSA, E. S. F.; GARCIA, Amauri; Electrochemical Behavior of an Al-Fe-Ni Alloy Affected by Nano-Sized Intermetallic Particles, 04/2015, Corrosion,Vol. 71, Fac. 4, pp.510-522, Houston, TX, Estados Unidos da América, 2015 *
|
36.
|
|
LONDONO, A. J. R.; Fatigue crack growth rate of two pearlitic rail steels, 04/2015, Engineering Fracture Mechanics,Vol. 138, pp.63-72, Oxford, Reino Unido, 2015
|
37.
|
|
OLIVEIRA, H. G.; FERREIRA, L. H.; BERTAZZOLI, Rodnei; LONGO, C.; Remediation of 17-alfa-ethinylestradiol aqueous solution by photocatalysis and electrochemically-assisted photocatalysis using TiO2 and TiO2/WO3 electrodes irradiated by a solar simulator, 04/2015, Water Research (Oxford),Vol. 72, pp.305-314, New York, Estados Unidos da América, 2015 *
|
38.
|
|
FAUSTINO JOZALA, Angela; MARTINS, K. F.; DUEK, Eliana; CORRÊA, R. C.; PENNA, Thereza; DUEK, Eliana A. de Rezende; CARLOTA O. RANGEL-YAGUI, Carlota O. Rangel-Yagui; ANDRE M. LOPES, Andre M. Lopes; Poly(lactic-co-glycolic acid) matrix incorporated with nisin as a novel antimicrobial biomaterial, 04/2015, World Journal of Microbiology & Biotechnology,Vol. 31, Fac. 4, pp.649-659, Dordrecht, Holanda, 2015
|
39.
|
|
ANHOLON, R.; SILVA, Silva, M.C.; SELF-SUSTAINABLE ECONOMIC AND FINANCIAL MANAGEMENT BUSINESS INCUBATORS: A Case Study in Brazilian Incubators, 03/2015, Asian Journal of Business and Management Sciences,Vol. 04, pp.14-25, Essex, Reino Unido, 2015
|
40.
|
|
ANHOLON, R.; ZOQUI, EUGENIO JOSE; PINTO, J. S.; NOVASKI, Olivio; Difficulties Experienced during Implementation of an Adapted Quality Management System in Incubated Companies, 03/2015, Business and Management Research,Vol. 4, pp.34-43, Toronto, Canadá, 2015
|
41.
|
|
SILVA, Iris Bento; SERAPHIM, E. C.; AGOSTINHO, Oswaldo Luiz; LIMA JÚNIOR, Orlando; BATALHA, G. F.; SILVA, I. B.; FONTES LIMA, Orlando; Lean office in health organization in the Brazilian Army, 03/2015, International Journal of Lean Six Sigma,Vol. 6, Fac. 1, pp.2-16, Bingley, Reino Unido, 2015 *
|
42.
|
|
BERKENBROCK, E.; DINIZ, Anselmo Eduardo; RODRIGUES, A. R.; SOUZA, A. F.; Influences of the tool path strategy on the machining force when milling free form geometries with a ball-end cutting tool, 03/2015, Journal of the Brazilian Society of Mechanical Sciences and Engineering (Impresso),Vol. 37, Fac. 2, pp.675-687, Rio de Janeiro, RJ, Brasil, 2015
|
43.
|
|
CHEUNG, N.; GARCIA, Amauri; SPINELLI, J. E.; SILVA, B.L.; SPINELLI, J. E.; Evaluation of solder/substrate thermal conductance and wetting angle of Sn-0.7wt%Cu-(0-0.1wt%Ni) solder alloys, 03/2015, Materials Letters (General ed.),Vol. 142, pp.163-167, Amsterdan, Holanda, 2015
|
44.
|
|
GOMES, L. G.; FERREIRA, I. L.; GARCIA, Amauri; ROCHA, Otávio Fernandes Lima; MOUTINHO, D. J. C.; FERREIRA, I. L.; The columnar to equiaxed transition in the directional solidification of aluminum based multicomponent alloys, 03/2015, REM. Revista Escola de Minas (Impresso),Vol. 68, Fac. 1, pp.85-90, Ouro Preto, MG, Brasil, 2015
|
45.
|
|
FARIA, G. A.; LONDONO, A. J. R.; In situ X-ray diffraction analysis of strain-induced transformations in Fe- and Co-base hardfacing alloys, 03/2015, Scripta Materialia,Vol. 98, pp.60-63, Oxford, Estados Unidos da América, 2015
|
46.
|
|
MERLINI, C.; CONTRI, G.; ALMEIDA, R. S.; G. SOARES, Bluma; BARRA, G. M. O.; RAMÔA, s. d. a. s.; DAVILA, M. A.; Electrically Conductive Polyaniline-Coated Electrospun Poly(Vinylidene Fluoride) Mats, 02/2015, Frontiers in Materials,Vol. 2, pp.36-56, Lausanne, Suiça, 2015
|
47.
|
|
FUJIWARA, E.; ENZWEILER, Jacinta; SANTOS, M. F. M.; SCHENKEL, E. A.; SUZUKI, Carlos Kenichi; Processing of quartz lumps rejected by silicon industry to obtain a raw material for silica glass, 02/2015, International Journal of Mineral Processing,Vol. 135, pp.65-70, Amsterdam, Holanda, 2015 *
|
48.
|
|
MILENKOVIC, SRDJAN; CARAM JR., Rubens; Mechanical Properties and Fracture Behavior of Directionally Solidified NiAl-V Eutectic Composites, 02/2015, Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science,Vol. 46A, Fac. 2, pp.557-565, Warrendale, PA, Estados Unidos da América, 2015
|
49.
|
|
RAGAZZO, L. B.; BENATI, D. M.; NADAL, R. L.; ZOQUI, EUGENIO JOSE; Obtaining Martensitic Structures during Thixoforming of Hypoeutectic Gray Cast Iron, 01/2015, Advances in Materials Science and Engineering,Vol. 2015, pp.1-7, New York, Estados Unidos da América, 2015
|
50.
|
|
GARCIA, Amauri; GOMES, L. G.; MOUTINHO, D. J. C.; FERREIRA, I. L.; ROCHA, Otávio Fernandes Lima; The Growth of Secondary Dendritic Arms in Directionally Solidified Al-Si-Cu Alloys: A Comparative Study with Binary Al-Si Alloys, 01/2015, Applied Mechanics and Materials,Vol. 719-720, pp.102-105, Stafa-Zurich, Suiça, 2015
|
51.
|
|
CARTAROZZI, L. P.; SPEJO, A. B.; FERREIRA JÚNIOR, R. S.; BARRAVIERA, Benedito; DUEK, Eliana A. de Rezende; CARVALHO, J. L.; GOES, Alfredo Miranda de; OLIVEIRA, A. L. R.; Mesenchymal stem cells engrafted in a fibrin scaffold stimulates Schwann cell reactivity and axonal regeneration following sciatic nerve tubulization, 01/2015, Brain Research Bulletin,Vol. 112, pp.14-24, New York, Estados Unidos da América, 2015 *
|
52.
|
|
ANHOLON, R.; NOVASKI, Olivio; PINTO, J. S.; SILVA, D.; ANALYSIS OF QUALITY MANAGEMENT SYSTEMS USING STATISTICAL TOOLS, 01/2015, Business Management Review,Vol. 04, pp.657-670, Dar es Salaam, Tanzânia, 2015 *
|
53.
|
|
FOGAGNOLO, J. B.; CANDEL, J. J,; AMIGÓ, V.; Laser cladding of Al-Si on Al-Cu sintered alloy to improve wear resistance, 01/2015, Journal of Achievements in Materials and Manufacturing Engineering,Vol. 73, pp.206-213, Gliwice, Polônia, 2015
|
54.
|
|
CAMPO, K. N.; LIMA, D D.; LOPES, E. S. N.; CARAM JR., Rubens; On the selection of Ti-Cu alloys for thixoforming processes: phase diagram and microstructural evaluation, 01/2015, Journal of Materials Science,Vol. 50, pp.8007-8017, London, Reino Unido, 2015
|
55.
|
|
DAMBORENEA, JUAN J. de; LAROSA, M. A.; ARENAS, MARIA ANGELES; MACIEL FILHO, Rubens; LAROSA, M. A.; LÓPEZ, JUAN MANUEL Hernández; MUNHOZ, A. L. J.; IERARDI, Maria Clara Filippini; ZAVAGLIA, Cecilia Amelia de C; CONDE, A.; Functionalization of Ti6Al4V scaffolds produced by direct metal laser for biomedical applications, 10/2015, Materials & Design,Vol. 83, pp.6-13, Oxford, Reino Unido, 2015 *
|
56.
|
|
GARCIA, A; CASTANHO, M. A. P.; GOULART, P.R.; BRITO, C. C.; SPINELLI, J. E.; CHEUNG, N.; GARCIA, Amauri; Steady and unsteady state peritectic solidification, 01/2015, Materials Science and Technology,Vol. 31, Fac. 1, pp.105-114, London, Reino Unido, 2015
|
57.
|
|
LEAL, C. V.; MARTINEZ, D. S. T.; ESPOSITO, A. R.; MÁS, B. A.; MORAES, A. C. M.; ALVES, O.L.; DUEK, Eliana A. de Rezende; CHARACTERIZATION AND IN VITRO EVALUATION OF POLY (L-LACTIC ACID) AND PURIFIED MULTIWALLED CARBON NANOTUBES NANOCOMPOSITES, 01/2015, Química Nova (Impresso),Vol. XY, pp.1-9, São Paulo, SP, Brasil, 2015 *
|
58.
|
|
PAULA, E. L.; MANO, V.; PEREIRA, F. V.; DUEK, Eliana A. de Rezende; HYDROLYTIC DEGRADATION BEHAVIOR OF PLLA NANOCOMPOSITES REINFORCED WITH MODIFIED CELLULOSE NANOCRYSTALS, 01/2015, Química Nova (Impresso),Vol. XY, pp.1-7, São Paulo, SP, Brasil, 2015
|
* Esta produção está associada também a outros órgãos
|
|
