|
DEMM - Artigos publicados em periódicos especializados arbitrados
|
|
Faculdade de Engenharia Mecânica
Departamento de Engenharia de Manufatura e Materiais
Produções / Artigos publicados em periódicos
Artigos publicados em periódicos especializados arbitrados
Circulação Nacional
1.
|
|
PEREIRA, C. M.; ANHOLON, R.; BATOCCHIO, Antonio; BATOCCHIO, Antonio; Method proposition to set the pallet positions designated to fractioned picking orders in a warehouse, 11/2016, GEPROS. Gestão da Produção, Operações e Sistemas (Online),Vol. 11, Fac. 4, pp.231-248, Bauru, SP, Brasil, 2016
|
2.
|
|
LIMA, V. C.; ANHOLON, R.; RAMPASSO, I. S.; QUELHAS, O. L.G., 300.757.937-68; QUELHAS, Quelhas, O.; Aplicação da teoria das filas em serviços bancários, 03/2016, Revista Produção Online,Vol. 16, Fac. 1, pp.210-241, Florianópolis, SC, Brasil, 2016
|
3.
|
|
BRAGA, J. F. A.; GARCIA, Amauri; SILVA, CAP; SPINELLI, J. E.; SILVA, M. A. P. S.; Lei de Crescimento em Função da Posição para Ligas do Sistema Monotético, 03/2016, Semina. Ciências Exatas e Tecnológicas (Online),Vol. 37, Fac. 1, pp.35-44, LONDRINA, PR, Brasil, 2016
|
Circulação Internacional
1.
|
|
GARCIA, Amauri; COSTA, T. A. P. S.; DIAS FILHO, J. M. S.; FEITOSA, E. S. F.; CASTELETTI, L. C.; The effect of microstructure length scale on dry sliding wear behaviour of monotectic Al-Bi-Sn alloys, 12/2016, Journal of Alloys and Compounds,Vol. 689, pp.767-776, Lausanne, Suiça, 2016
|
2.
|
|
ZANUTTO, F. V.; SEGUNDO, J. D. P. M.; SALLES, T. H. C.; SERVAT, L.; SOUSA, I.M.O.; CHORILLI, M.; DAVILA, M. A.; FOGLIO, M. A.; Development of membrane by electrospinning containing semi-synthetic derivatives of Artemisia annua Linnaeus, 12/2016, Planta Medica,Vol. 81, Fac. S 01, Stuttgart, Alemanha, 2016 *
|
3.
|
|
SOUSA, I. M. O.; FOGLIO, M. A.; SANCHEZ, J. L. D.; ZANUTTO, F. V.; JORGE, Michelle; QUEIROZ, Nubia; CHORILLI, M.; SERVAT, L.; BASTING, R.; DAVILA, M. A.; Pharmaceutical system containing Arrabidaea chica extract for use in skin disease, 12/2016, Planta Medica,Vol. 81, Fac. S 01, Stuttgart, Alemanha, 2016 *
|
4.
|
|
AGOSTINHO, Oswaldo Luiz; SANTIS, S. H. S.; ANDREOTTI, J. T.; FORNAZZARI, L. B.; PRETO, L. A. O.; MODELOS DE COMPETITIVIDADE: CORRELAÇÃO ENTRE O CAPITAL HUMANO E AS ESTRATÉGIAS EMPRESARIAIS, 11/2016, Educação, Gestão e Sociedade,Vol. 6, Fac. 24, pp.1-10, Jandira, SP, Brasil, 2016
|
5.
|
|
OLIVEIRA, F. S.; BAPTISTA, E. A.; COPPINI, Nivaldo Lemos; Rosqueamento com machos máquina tratados com condicionador metálico, 11/2016, Espacios (Caracas),Vol. 37, pp.1-8, Caracas, Venezuela, 2016
|
6.
|
|
ANTONIALLI, A. Í. S.; MAGRI, A.; DINIZ, Anselmo Eduardo; Tool life and tool wear in taper turning of a nickel-based superalloy, 11/2016, International Journal, Advanced Manufacturing Technology,Vol. 87, Fac. 5-8, pp.2023-2032, Surrey, Reino Unido, 2016
|
7.
|
|
ANHOLON, R.; QUELHAS, O. L.G., 300.757.937-68; LEAL FILHO, W.; PINTO, J. S.; FEHER, A.; QUELHAS, Quelhas, O.; PINTO, J,S., JEFFERSON DE SOUZA PINTO; Assessing corporate social responsibility concepts used by a Brazilian manufacturer of airplanes: a case study at Embraer, 11/2016, Journal of Cleaner Production,Vol. 135, pp.740-749, Oxford, Reino Unido, 2016
|
8.
|
|
SALVADOR, C. A. F.; LOPES, E. S. N.; OSPINA, C. A.; CARAM JR., Rubens; Orthorhombic martensite formation upon aging in a Ti-30Nb-4Sn alloy, 11/2016, Materials Chemistry and Physics,Vol. 183, pp.238-246, Lausanne, Suiça, 2016
|
9.
|
|
COSTA, F. H.; CARAM JR., Rubens; Alpha phase precipitation in Ti-30Nb-1Fe alloys – phase transformations in continuous heating and aging heat treatments, 11/2016, Materials Science & Engineering. A, Structural Materials: properties, microstructure and processing,Vol. 677, pp.222-229, Oxford, Reino Unido, 2016
|
10.
|
|
GARCIA, Amauri; COSTA, T. A. P. S.; DIAS FILHO, J. M. S.; GOMES, L. G.; ROCHA, Otávio Fernandes Lima; Effect of solution time in T6 heat treatment on microstructure and hardness of a directionally solidified Al-Si-Cu alloy, 10/2016, Journal of Alloys and Compounds,Vol. 683, pp.485-494, Lausanne, Suiça, 2016
|
11.
|
|
MEI, Paulo Roberto; DIAZ, J. A. Á.; FERNANDEZ, J. R.; LONDONO, A. J. R.; Microstructure and fracture toughness of multipass friction stir welded joints of API-5L-X80 steel plates, 09/2016, Materials Science & Engineering. A, Structural Materials: properties, microstructure and processing,Vol. 673, pp.257-265, Oxford, Reino Unido, 2016
|
12.
|
|
CARAM, R.; SALVADOR, C. A. F.; OPINI, V. C.; LOPES, E. S. N.; CARAM JR., Rubens; Microstructure evolution of Ti-30Nb-(4Sn) alloys during classical and step-quench aging heat treatments, 09/2016, Materials Science and Technology,Vol. 33, Fac. 4, pp.400-407, London, Reino Unido, 2016
|
13.
|
|
FONSECA, E. B.; BUTTON, Sergio Tonini; SANTOS, T. F. A.; LONDONO, A. J. R.; Physical Simulation of a Duplex Stainless Steel Friction Stir Welding by the Numerical and Experimental Analysis of Hot Torsion Tests, 09/2016, Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science,Vol. 47, Fac. 9, pp.4543-4552, Warrendale, PA, Estados Unidos da América, 2016
|
14.
|
|
LIMA, V.; MEI, Paulo Roberto; DIAZ, J. A. Á.; RUCHERT, C. O. F. T.; LONDONO, A. J. R.; Guide for Recommended Practices to Perform Crack Tip Opening Displacement Tests in High Strength Low Alloy Steels, 09/2016, Soldagem e Inspeção (Impresso),Vol. 21, Fac. 3, pp.290-302, São Paulo, SP, Brasil, 2016
|
15.
|
|
BENATI, D. M.; ZOQUI, EUGENIO JOSE; In Situ Observation of Semisolid Fe-2.5C-1.5Si Gray Cast Iron, 09/2016, Solid State Phenomena,Vol. 256, pp.63-68, Durnten-Zurich, Holanda, 2016
|
16.
|
|
TORRES, L. V.; ZOQUI, EUGENIO JOSE; PRONI, C. T. W.; Comparison of Morphological Evolution of Al-7wt%Si-2.5wt%Cu Alloy Produced by Direct Chill Casting/Electromagnetic Stirring and ECAP, 09/2016, Solid State Phenomena,Vol. 256, pp.17-24, Durnten-Zurich, Holanda, 2016
|
17.
|
|
SANTOS, W. L. R.; SILVA, B.L.; BERTELLI, Felipe; SPINELLI, J. E.; CHEUNG, N.; GARCIA, Amauri; An alternative thermal approach to evaluate the wettability of solder alloys, 08/2016, Applied Thermal Engineering,Vol. 107, pp.431-440, Oxford, Reino Unido, 2016
|
18.
|
|
BRITO, T. A. V.; MOTTA, ADRIANA CRISTINA; SANTOS JR, Arnaldo Rodrigues; ZAVAGLIA, Cecilia Amelia de C; CARDOSO, G. B. C.; Fibrous Scaffold Produced By Rotary Jet Spinning Technique, 08/2016, International Journal of Engineering Research and Applications (IJERA),Vol. 6, pp.22-27, Uttar Pradesh, Índia, 2016
|
19.
|
|
CARDOSO, G. B. C.; MANIGLIO, D.; VOLPATO, F. Z.; TONDON, A.; MIGLIARESI, C.; KAUNAS, R. R.; ZAVAGLIA, Cecilia Amelia de C; Oleic acid surfactant in polycaprolactone/hydroxyapatite-composites for bone tissue engineering, 08/2016, Journal of Biomedical Materials Research. Part B, Applied Biomaterials,Vol. 104, Fac. 6, pp.1076-1082, New Jersei, Estados Unidos da América, 2016
|
20.
|
|
PRONI, C. T. W.; TORRES, L. V.; HAGHAYEGHI, R.; ZOQUI, EUGENIO JOSE; ECAP: An Alternative Route for Producing AlSiCu for Use in SSM Processing, 08/2016, Materials Characterization,Vol. 118, pp.252-262, Amsterdam, Holanda, 2016
|
21.
|
|
VASCONCELOS, A. J.; ROCHA, Otávio Fernandes Lima; GARCIA, Amauri; SPINELLI, J. E.; KONNO, C. Y. N.; BARROS, A. S.; SILVA, M. A. P. S.; SPINELLI, J. E.; Analysis of the Microstructural Evolution during the Transient Upward, Downward and Horizontal Directional Solidification of the Al-1.2wt%Pb Monotectic Alloy, 08/2016, Materials Science Forum,Vol. 869, pp.429-434, Aedermannsdorf, Suiça, 2016
|
22.
|
|
FERNANDES, M. T.; GARCIA, Amauri; CASTRO, J. A., José Adilson de Castro; FERREIRA, I. L.; JÁCOME, P. A. D.; FERREIRA, A. F.; CASTRO, J. A.; LEÃO FERREIRA, Ivaldo; Application of Computational Thermodynamics to the Evolution of Surface Tension and Gibbs-Thomson Coefficient during Multicomponent Aluminum Alloy Solidification, 08/2016, Materials Science Forum,Vol. 869, pp.416-422, Aedermannsdorf, Suiça, 2016
|
23.
|
|
GABRIEL, S. B.; DILLE, J.; NUNES, Carlos Angelo; BALDAN, Renato; REZENDE, M. C.; ALMEIDA, L. H.; SANTOS JR, E.; MEI, Paulo Roberto; ARAUJO, L. S.; Effect of Hot Swaging on Microstructure and Properties of Aged Ti-10Mo-20Nb Alloy, 08/2016, Materials Science Forum,Vol. 869, pp.952-956, Aedermannsdorf, Suiça, 2016
|
24.
|
|
WADA, C. M.; RANGEL, A. L. R.; SOUZA, M. A.; ALMEIDA, R. S.; CLARO, A. P. R. A.; REZENDE, MC. R. A.; DAVILA, M. A.; Surface Modification of Ti-30Ta Alloy by Electrospun PCL Deposition, 08/2016, Materials Science Forum,Vol. 869, pp.930-934, Aedermannsdorf, Suiça, 2016
|
25.
|
|
BATOCCHIO, Antonio; A method for evaluating business models implementation process, 07/2016, Business Process Management Journal,Vol. 22, Fac. 4, pp.712-735, Bingley, Reino Unido, 2016
|
26.
|
|
RODRIGUES, m. Am; HASSUI, A.; SILVA, R. H. L.; LOUREIRO, D.; Tool life and wear mechanisms during Alloy 625 face milling, 07/2016, International Journal, Advanced Manufacturing Technology,Vol. 85, Fac. 5-8, pp.1439-1448, Surrey, Reino Unido, 2016
|
27.
|
|
BRITO, C. C.; BRITO, T. A. V.; FREITAS, E. S. F.; CHEUNG, N.; SPINELLI, J. E.; GARCIA, Amauri; Cellular/dendritic arrays and intermetallic phases affecting corrosion and mechanical resistances of an Al-Mg-Si alloy, 07/2016, Journal of Alloys and Compounds,Vol. 673, pp.220-230, Lausanne, Suiça, 2016
|
28.
|
|
BERTELLI, F.; CHEUNG, N.; LEÃO FERREIRA, Ivaldo; GARCIA, Amauri; Evaluation of thermophysical properties of Al-Sn-Si alloys based on computational thermodynamics and validation by numerical and experimental simulation of solidification, 07/2016, Journal of Alloys and Compounds,Vol. 98, pp.9-20, Lausanne, Suiça, 2016
|
29.
|
|
CARAM, R.; CREMASCO, A.; BERTAZZOLI, Rodnei; CARAM JR., Rubens; LOPES, E. S. N.; Application of coupled substrate aging and TiO2 nanotube crystallization heat treatments in cold-rolled Ti-Nb-Sn alloys, 07/2016, Journal of Materials Science,Vol. 51, Fac. 13, pp.6389-6399, London, Reino Unido, 2016 *
|
30.
|
|
SILVA, R. H. L.; SILVA, M. B.; HASSUI, A.; A probabilistic neural network applied in monitoring tool wear in the end milling operation via acoustic emission and cutting power signals, 07/2016, Machining Science and Technology: an international journal,Vol. 20, Fac. 3, pp.386-405, New York, NY, Estados Unidos da América, 2016
|
31.
|
|
CARAM JR., Rubens; α phase precipitation and mechanical properties of Nb-modified Ti-5553 alloy, 07/2016, Materials Science & Engineering. A, Structural Materials: properties, microstructure and processing,Vol. 670, pp.112-121, Oxford, Reino Unido, 2016
|
32.
|
|
FOGAGNOLO, J. B.; RODRIGUES, A. V.; LEVA, E. S.; LIMA, M. S. F.; CARAM JR., Rubens; Surface stiffness gradient in Ti parts obtained by laser surface alloying with Cu and Nb, 07/2016, Surface & Coatings Technology,Vol. 297, pp.34-42, Lausanne, Holanda, 2016
|
33.
|
|
ANHOLON, R.; ORDONEZ, R. E. C.; QUELHAS, Quelhas, O.; SILVA, D.; Determining the Offer of Electives of Production Engineering in Mechanical Engineering Courses: the use of Survey and Statistical Analysi, 06/2016, Espacios (Caracas),Vol. 37, pp.1-4, Caracas, Venezuela, 2016 *
|
34.
|
|
ANHOLON, R.; SANO, A. T.; Analysis of critical processes in the implementation of lean manufacturing projects using project management guidelines, 06/2016, International Journal, Advanced Manufacturing Technology,Vol. 84, Fac. 9-12, pp.2247-2256, Surrey, Reino Unido, 2016
|
35.
|
|
LUCON, E.; MEI, Paulo Roberto; DIAZ, J. A. Á.; SOWARDS, J. W.; LONDONO, A. J. R.; Assessment of Ductile-to-Brittle Transition Behavior of Localized Microstructural Regions in a Friction-Stir Welded X80 Pipeline Steel with Miniaturized Charpy V-Notch Testing, 06/2016, Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science,Vol. 47, Fac. 6, pp.2855-2865, Warrendale, PA, Estados Unidos da América, 2016
|
36.
|
|
BRITO, T. A. V.; FREITAS, E. S. F.; BRITO, C. C.; CHEUNG, N.; ARENAS, MARIA ANGELES; CONDE, Ana; DAMBORENEA, Juan; GARCIA, Amauri; Thermal Parameters and Microstructural Development in Directionally Solidified Zn-Rich Zn-Mg Alloys, 06/2016, Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science,Vol. 47, Fac. 6, pp.3052-3064, Warrendale, PA, Estados Unidos da América, 2016
|
37.
|
|
VALENZUELA REYES, Rodrigo; KAKITANI, R.; COSTA, T. A. P. S.; SPINELLI, J. E.; CHEUNG, N.; GARCIA, Amauri; Cooling thermal parameters, microstructural spacing and mechanical properties in a directionally solidified hypereutectic Al–Si alloy, 06/2016, Philosophical Magazine Letters (Print),Vol. 96, Fac. 6, pp.228-237, Abingdon, Estados Unidos da América, 2016
|
38.
|
|
FANTON, L.; LIMA, N. B.; HAYAMA, A. O. F.; CARAM JR., Rubens; FOGAGNOLO, J. B.; Texture Development in Cold Deformed and Recrystallized Ti-30Nb-4Sn Alloy and Its Effects on Hardness and Young's Modulus-, 05/2016, Advanced Engineering Materials (oNLINE),Vol. 47, pp.49-58, Weinheim, Alemanha, 2016
|
39.
|
|
CARNEIRO, J. F.; ROCHA, R.S.; HAMMER, P.; BERTAZZOLI, Rodnei; LANZA, M. R. V.; Hydrogen peroxide electrogeneration in gas diffusion electrode nanostructured with Ta2O5, 05/2016, Applied Catalysis. A, General (Print),Vol. 517, pp.161-167, Amsterdan, Holanda, 2016
|
40.
|
|
SILVA, C. S.; BAPTISTA, E. A.; COPPINI, Nivaldo Lemos; Utilização de luz ultravioleta para controle de contaminação microbiológica nos fluídos de corte, 05/2016, Espacios (Caracas),Vol. 37, pp.1-12, Caracas, Venezuela, 2016
|
41.
|
|
CARAM, R.; CAMPO, K. N.; ANDRADE, D. R.; OPINI, V. C.; MELLO, M. G.; LOPES, E. S. N.; CARAM JR., Rubens; On the hardenability of Nb-modified metastable beta Ti-5553 alloy, 05/2016, Journal of Alloys and Compounds,Vol. 667, pp.211-218, Lausanne, Suiça, 2016
|
42.
|
|
SINATORA, Amilton; MEI, Paulo Roberto; FONSECA, S. T.; LONDONO, A. J. R.; MINICUCCI, D. J.; AFONSO, C. R. M.; Effects of Vanadium on the Continuous Cooling Transformation of 0.7 %C Steel for Railway Wheels, 04/2016, Comparison of Four Thermo-Mechanical Models for Simulating Reactive Flow in Porous Materials,Vol. 367, pp.60-67, Stafa-Zurich, Suiça, 2016
|
43.
|
|
CREMASCO, A.; LOPES, É. S. N.; BERTAZZOLI, Rodnei; CARAM JR., Rubens; Application of coupled substrate aging and TiO2 nanotube crystallization heat treatments in cold-rolled Ti–Nb–Sn alloys, 04/2016, Journal of Materials Science,Vol. 51, pp.6389-6399, London, Reino Unido, 2016 *
|
44.
|
|
GARCIA, Amauri; SILVA, B.L.; SPINELLI, J. E.; Cooling thermal parameters and microstructure features of directionally solidified ternary Sn-Bi-(Cu,Ag) solder alloys, 04/2016, Materials Characterization,Vol. 114, pp.30-42, Amsterdam, Holanda, 2016
|
45.
|
|
CAMPO, K. N.; ZOQUI, EUGENIO JOSE; Thixoforming of an ECAPed Aluminum A356 Alloy: Microstructure Evolution, Rheological Behavior, and Mechanical Properties, 04/2016, Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science,Vol. 47A, Fac. 4, pp.1792-1802, Warrendale, PA, Estados Unidos da América, 2016
|
46.
|
|
BERTELLI, F.; FARIA, J. D.; GOULART, P.R.; BRITO, C. C.; CHEUNG, N.; GARCIA, Amauri; Numerical and experimental modelling of two-dimensional unsteady heat transfer during inward solidification of square billets, 03/2016, Applied Thermal Engineering,Vol. 96, pp.454-462, Oxford, Reino Unido, 2016
|
47.
|
|
ZOQUI, EUGENIO JOSE; BENATI, D. M.; PRONI, C. T. W.; TORRES, L. V.; Thermodynamic evaluation of the thixoformability of Al-Si alloys, 03/2016, CALPHAD: computer coupling of phase diagrams and thermochemistry,Vol. 52, pp.98-109, Kidlington, Reino Unido, 2016
|
48.
|
|
MACEDO, R. A.; SILVA, B. l.; GARCIA, A; SPINELLI, J. E.; GARCIA, Amauri; Correlation between microstructure and hardness of a Bi-1.5wt%Ag lead-free solder alloy, 03/2016, IOP Conference Series: Materials Science and Engineering (Online),Vol. 117, pp.12028-12035, Bristol, Reino Unido, 2016
|
49.
|
|
VERISSIMO, N. C.; BRITO, C. C.; SANTOS, W. L. R.; CHEUNG, N.; SPINELLI, J. E.; GARCIA, Amauri; Interconnection of Zn content, macrosegregation, dendritic growth, nature of intermetallics and hardness in directionally solidified Mg–Zn alloys, 03/2016, Journal of Alloys and Compounds,Vol. 662, pp.1-10, Lausanne, Suiça, 2016
|
50.
|
|
SEPTÍMIO, R. S.; BUTTON, Sergio Tonini; Processing maps for the analysis of hot workability of microalloyed steels 38MnSiVS5 and 0.39C1.47Mn, 03/2016, Journal of Materials Science,Vol. 51, Fac. 5, pp.2512-2528, London, Reino Unido, 2016
|
51.
|
|
LOPES, É. S. N.; SALVADOR, C. A. F.; ANDRADE, D. R.; CREMASCO, A.; CAMPO, K. N.; CARAM JR., Rubens; Microstructure, Mechanical Properties, and Electrochemical Behavior of Ti-Nb-Fe Alloys Applied as Biomaterials., 03/2016, Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science,Vol. 47, Fac. A, pp.3213-3226, Warrendale, PA, Estados Unidos da América, 2016 *
|
52.
|
|
MENDES, M. B. M.; MEDEIROS, R. C.; SAWAZAKI, Renato; LOPES, E. S. N.; FERNANDES MOREIRA, Roger William; MOURA, A. L.; MARCHIORI, Érica Cristina; LOPES, É. S. N.; Mechanical and microstructural properties of fixation systems used in oral and maxillofacial surgery, 03/2016, Oral and Maxillofacial Surgery,Vol. 20, Fac. 1, pp.85-90, Heidelberg, Alemanha, 2016 *
|
53.
|
|
DUARTE, M. A. T.; MOTTA, A.C.; DUEK, Eliana A. de Rezende; Characterization of pin blends Poly (L-co-D,L lactic acid)/Poly(caprolactone diol) (PLDLA/PCL-T) and analysis of mechanical property of pins during in vitro degradation, 03/2016, Polímeros (São Carlos. Impresso),Vol. 26, Fac. 2, pp.185-191, São Carlos, SP, Brasil, 2016
|
54.
|
|
AGOSTINHO, Oswaldo Luiz; An adaptability index system for product development, 03/2016, Proceedings of the Institution of Mechanical Engineers. Part B, Journal of Engineering Manufacture,Vol. 1, pp.1-10, London, Inglaterra, 2016
|
55.
|
|
SCANDIFFIO, Innocenzo; DINIZ, Anselmo Eduardo; SOUZA, A. F.; Evaluating surface roughness, tool life, and machining force when milling free-form shapes on hardened AISI D6 steel, 02/2016, International Journal, Advanced Manufacturing Technology,Vol. 82, Fac. 9-12, pp.2075-2086, Surrey, Reino Unido, 2016
|
56.
|
|
BATALHA, M. H. F.; BUTTON, Sergio Tonini; Hot formability of DIN 27MnCrB5 steel sheets under controlled thinning, 02/2016, Journal of Materials Processing Technology,Vol. 228, pp.98-105, Amsterdam, Holanda, 2016
|
57.
|
|
SILVA, B.L.; BERTELLI, F.; CANTÉ, Manuel Venceslau; SPINELLI, J. E.; CHEUNG, N.; GARCIA, Amauri; Solder/substrate interfacial thermal conductance and wetting angles of Bi–Ag solder alloys, 02/2016, Journal of Materials Science. Materials in Electronics,Vol. 27, Fac. 2, pp.1994-2003, Norwell, Estados Unidos da América, 2016
|
58.
|
|
CARAM, R.; JARDINI, A. L.; LEVA, E. S.; CARAM JR., Rubens; FOGAGNOLO, J. B.; Ductility improvement due to martensite α? decomposition in porous Ti-6Al-4V parts produced by selective laser melting for orthopedic implants, 02/2016, Journal of the Mechanical Behavior of Biomedical Materials (Print),Vol. 54, pp.149-158, Amsterdam, Holanda, 2016
|
59.
|
|
MARTINS, M. M.; BUTTON, Sergio Tonini; Analysis of Aluminum Extrusion in a 90o Die by Finite Volume Method, 01/2016, Advanced Materials Research (Online),Vol. 1135, pp.153-160, Millersville, Estados Unidos da América, 2016
|
60.
|
|
TORRES, L. V.; TORRES, L. F.; ZOQUI, EUGENIO JOSE; Electromagnetic Stirring versus ECAP: Morphological Comparison of Al-Si-Cu Alloys to Make the Microstructural Refinement for Use in SSM Processing, 01/2016, Advances in Materials Science and Engineering (Print),Vol. 2016, pp.1-7, New York, Estados Unidos da América, 2016
|
61.
|
|
SHIHOMATSU, A.; BUTTON, Sergio Tonini; SILVA, IRIS BENTO; Tribological Behavior of Laser Textured Hot Stamping Dies, 01/2016, Advances in Tribology,Vol. 2016, Fac. 1, pp.1-15, New York, NY, Estados Unidos da América, 2016
|
62.
|
|
PEREIRA JUNIOR, Alfredo; BRESCIANI FILHO, Ettore; ILARIO, E.; Modelando o Monismo de Triplo Aspecto em um Espaço de Estados com Dimensões Fracionárias., 01/2016, CompleXitas - Revista de Filosofia Temática,Vol. 1, Fac. 1, pp.95-100, Belém, PA, Brasil, 2016 *
|
63.
|
|
ROLAND, K.; CARDOSO, G. B. C.; ZAVAGLIA, Cecilia Amelia de C; Coaxial rotary jet spinning: low cost method for production shell-core fibers, 01/2016, Frontiers in Bioengineering and Biotechnology,Vol. 4, pp.1-8, Lausanne, Suiça, 2016
|
64.
|
|
ANHOLON, R.; NOVASKI, Olivio; PORTO, G. S.; PINTO, J,S., JEFFERSON DE SOUZA PINTO; Knowledge management in incubated companies: proposal of a model to enhance managerial skills, 01/2016, International Journal of Knowledge Management Studies,Vol. 7, Fac. 1/2, pp.63-86, Oxfordshire, Reino Unido, 2016
|
65.
|
|
DUARTE, R. N.; FARIA, J. D.; BRITO, C. C.; VERISSIMO, N. C.; CHEUNG, N.; GARCIA, Amauri; Length scale of the dendritic microstructure affecting tensile properties of Al–(Ag)–(Cu) alloys, 01/2016, International Journal of Modern Physics B,Vol. 30, Fac. 03, pp.1550261-15502619, Cingapura, 2016
|
66.
|
|
KULL NETO, H.; DINIZ, Anselmo Eduardo; PEDERIVA, Robson; Influence of tooth passing frequency, feed direction, and tool overhang on the surface roughness of curved surfaces of hardened steel, 01/2016, International Journal, Advanced Manufacturing Technology,Vol. 82, Fac. 1-4, pp.753-764, Surrey, Reino Unido, 2016 *
|
67.
|
|
KULL NETO, H.; DINIZ, Anselmo Eduardo; PEDERIVA, Robson; The influence of cutting forces on surface roughness in the milling of curved hardened steel surfaces, 01/2016, International Journal, Advanced Manufacturing Technology,Vol. 84, pp.1209-1218, Surrey, Reino Unido, 2016 *
|
68.
|
|
DINIZ, Anselmo Eduardo; MACHADO, A. R.; CORRÊA, J. G.; Tool wear mechanisms in the machining of steels and stainless steels, 04/2016, International Journal, Advanced Manufacturing Technology,Surrey, Reino Unido, 2016
|
69.
|
|
HAGHAYEGHI, R.; ZOQUI, EUGENIO JOSE; Process development and grain refinement, 01/2016, La Metallurgia Italiana,Vol. 108, pp.149-152, Milan, Itália, 2016
|
70.
|
|
OPINI, V. C.; SALVADOR, C. A. F.; CAMPO, K. N.; CHAVES, RICARDO RISSO; CARAM JR., Rubens; LOPES, E. S. N.; α phase precipitation and mechanical properties of Nb-modified Ti-5553 alloy, 01/2016, Materials Science & Engineering. A, Structural Materials: properties, microstructure and processing,Vol. 670, pp.112-121, Oxford, Reino Unido, 2016
|
71.
|
|
HIRAYAMA, E. T.; NOVASKI, Olivio; Proposta de Procedimento de Gerenciamento de Projetos de Dispositivos para Máquinas Industriais, 01/2016, Perspectivas da Ciência e Tecnologia,Vol. 5, pp.43-67, RIO DE JANEIRO, RJ, Brasil, 2016
|
72.
|
|
JARDINI, A. L.; M.F. MACÊDO, M.F. Macêdo; L.F. BERNARDES, L.F. Bernardes; MACIEL FILHO, R.; GHIZONI, E.; MUNHOZ, A. L. J.; KHARMANDAYAN, P.; LAROSA, M. A.; LAMBERT, C. S.; ZAVAGLIA, Cecilia Amelia de C; MACIEL FILHO, Rubens; CALDERONI, Davi Reis; Improvement in Cranioplasty: Advanced Prosthesis Biomanufacturing, 01/2016, Procedia CIRP,Vol. 49, pp.203-208, Amsterdam, Holanda, 2016 *
|
73.
|
|
CASTANHERA, I. C.; DINIZ, Anselmo Eduardo; High Speed Milling of Hardened Steel Convex Surface, 01/2016, Procedia Manufacturing,Vol. 5, pp.220-231, Amsterdam, Holanda, 2016
|
74.
|
|
MAGRI, A.; DINIZ, Anselmo Eduardo; SUYAMA, D. I.; Evaluating the use of high-pressure coolant in turning process of Inconel 625 nickel-based alloy, 08/2016, Proceedings of the Institution of Mechanical Engineers. Part B, Journal of Engineering Manufacture,London, Inglaterra, 2016
|
75.
|
|
RODRIGUES, M. A.; ANHOLON, R.; QUELHAS, Quelhas, O.; ORDONEZ, R. E. C.; GESTÃO DE PROJETOS NO DESENVOLVIMENTO DE PRODUTOS DA INDÚSTRIA AERONÁUTICA: UMA ANÁLISE DA IMPORTÂNCIA E EFICIÊNCIA DOS PROCESSOS DA ENGENHARIA DE MANUFATURA, 01/2016, Revista GEINTEC: gestao, inovacao e tecnologias,Vol. 6, pp.3472-3486, Itabaiana, SE, Brasil, 2016
|
* Esta produção está associada também a outros órgãos
|
|
|
| |
