School of Chemical Engineering

The polydispersity of nanoparticles produced by flaming spray pyrolysis subjected to simultaneous nucleation, agglomeration and sintering by solving a bivariate population balance equation

Hybrid phenomenology and machine learning approach to modeling catalytic systems with high uncertainty

Approaches to solving a supply chain problem in a chemical industry: rule-based system and hybrid programming

Coupling learning machine models and acoustic models for emulsion characterization using an ultrasonic cell

Adsorption of antibiotic cefazolin sodium on organophilic clay spectrogel type C

Adsorption of propranolol hydrochloride on calcined green-slime clay

Adsorption of human IgC onto monolithic acrylamide-alginate-allyl-O-phospho-L-tyrosine cryogel

Adsorption of copper ions on chemically modified chitosan and alginate in the presence of Β-amyloid peptide or histidine

Adsorption of the emerging contaminant bisphenol-A on clayey material

Agglomeration of Hydrolyzed Collagen in a Fluidized Bed

Agglomeration of gum arabic in a fluidized bed: analysis of process parameters and the feasibility of using inulin as a binder

Expansion of scale of conditioning tanks used in apatite flotation

Analysis of the quality of 2D-2C and 2D-3C F-PIV measurements of the liquid base velocity in a bubble column

Analysis of the quality of F-PIV measurements and fluid dynamics in a bubble column using chaotic invariants

Analysis of the performance of separation and purification processes for hyaluronic acid produced by fermentation

Analysis of the thermodynamic performance of cascade refrigeration systems using refrigerant mixtures containing CO2

Analysis of the thermodynamic performance of a trigeneration system with different configurations applied to a medium-sized hospital

Economic analysis of the MBR Air Lift and MBR Cross Flow processes for treating effluents for reuse

Phenomenological analysis, modeling and simulation of biodiesel synthesis in micro reactors with static elements

Numerical analysis of the influence of baffles on the gas-solid flow in FCC risers via computational fluid dynamics

Parametric analysis and optimization of a cascade refrigeration cycle using HFCs-DMAc and natural refrigerants

RAM and transport analysis of beer filling lines - a case study

Analysis via CFD of single-phase and two-phase gas-liquid flow through orifice plates

Wavelet analysis applied to pressure fluctuation signals in fluidized bed

Sensitivity analyzes and opportunities for improvement of different refrigeration systems via thermodynamic criteria

Application of the seeding technique in protein precipitation in complex systems

Application of graphene oxide-chitosan composite adsorbent for adsorption of polycyclic aromatic hydrocarbons (PAH) from produced water effluent

Application of two reversible deactivation radical polymerization techniques for the synthesis of PS-B-PMMA

Application of artificial neural networks for the empirical modeling of a dissolved air flotation prototype

Application of residue from solid-liquid extraction of alginate from Sargassum filipendula algae for bioadsorption of aluminum ions

Increase in the activities of glycohydrolases produced by Trichoderma harzianum through optimization of the culture medium and classical genetic improvement aiming at the viability of 2G ethanol

Increased nitric acid production and reduced nitrogen oxide emissions in a nitrous gas recovery system

Comparative evaluation of processes for obtaining 1st and 2nd generation hydrated and anhydrous bioethanol using non-equilibrium stage modeling

Comparative evaluation of the chemical absorption tower project for capturing acid phases from natural gas with different types of filling and capturing CO2 from combustion gases

Assessment of changes in air quality caused by emissions of atmospheric pollutants from a metallurgical industry located in the metropolitan region of São Paulo

Evaluation of the application of retest methodology in chemical products to minimize the generation and disposal of waste in laboratories

Evaluation of calcined green slime clay as an adsorbent in caffeine removal

Evaluation of kefir biomass and nanosilica as agents for modifying the properties of chitosan films

Assessment of contamination by Lactobacillus fermentum in a second generation bioethanol fermentation process

Assessment of operating conditions and the influence of electrolyte on lithium-oxygen batteries

Evaluation of integrated sugarcane and microalgae biorefineries

Evaluation of parameters for the creation of MnO2 electrodes on Ni foam applied to Li-O2 batteries

Evaluation of a reaction system with coupled distillation for the production of amphoteric and quaternary ammonium surfactant intermediates

Evaluation of terpenes as solvents in the sugarcane wax extraction process

Assessment of the life cycle of methanol produced by cogasification of mineral coal and residual rice biomass

Evaluation of the pre-treatment process of sugarcane bagasse with protic ionic liquids for the production of cellulosic ethanol

Evaluation of solid-liquid extraction residue of alginate from Sargassum filipendula algae for bioadsorption of metal ions (Zn2+) in dilute aqueous solutions

Assessment of the effects of the atmosphere on the ablation of coiled carbon-phenolic composites

Evaluation of discharge products and performance of lithium-oxygen batteries in open and closed systems

Computational thermodynamic evaluation of the use of physical solvents in high-efficiency absorption columns for CO2 capture

Advances in the heterogeneous photocatalysis process for the degradation of aromatic compounds in the gas phase using TIO2, O3 and UV-C light

Binary bioadsorption of silver and copper ions in residue from the extraction of alginate from Sargassum filipendula algae

Bioadsorption of propanol on particles derived from alginate extraction from the alga Sargassum filipendula

Multicompound bioadsorption of chromium(III), nickel(II) and zinc(II) using alginate extraction residue from the algae Sargassum filipendula as bioadsorbent

Lactic acid biorefinery from sugar cane: simulation and analysis of conceptual design for the production of 1,2-propanediol via hybrid route

Lignocellulosic biorefinery employing protic ionic liquids for ethanol and lignin production

Calculation of phase equilibrium in the formation of hydrates in mixtures of hydrocarbons and carbon dioxide using the criteria of isofugacity and minimization of Gibbs Energy

Specific heat at constant volume of confined fluids: effect of pore size

Capture of circulating tumor cells in nanostructured coatings composed of hyaluronic acid and chitosan

Turbulent characteristics of a stirred tank with PIV 2C-2D measurements

Characterization of Kraft lignins from Eucalyptus urograndis with respect to structure, solubility and solubility parameters

Characterization of pineapple residue and its use in the production of biosurfactants by Bacilius subtilis

Operating characterization of Li-O2 batteries: the effect of redox mediators

Sorting plastic resins for recycling using acoustic signal processing and artificial neural networks

Commissioning and evaluation of methodologies for determining PEV curves for fuel mixtures

Behavior of the temperature field around pool fires in controlled experiments and numerical modeling

Preparation and physicochemical characterization and antimicrobial activity of alginate-based nanocomposite biofilms containing ZnO nanoparticles

Contribution to the study of the asphalt-soil binary

Neural MPC controller with real-time model adaptation applied to PH control and level control with communicating tanks

Economic predictive controller with linear approximation of the economic function

Control of a neutralization reactor using the extremum-seeking method

Multivariable predictive control of a continuous fermentation process for first generation ethanol production

Catalytic conversion of lignin and lignocellulosic biomass derivatives

Ethanol conversion using nickel and copper substituted hydroxyapatite catalysts

Ethanol conversion using zinc and manganese substituted hydroxyapatite catalysts

Conversion of ethanol, ethyl acetate and acetone into a hydroxyapatite catalyst

PAAm-Alg-AGE-IDA monolithic cryogel: effect of metal ion on bovine IgG adsorption

Degradation of ethylbenzene by heterogeneous photocatalysis associated with ozone (TiO2/UV/O3): evaluation of different percentages of catalytic coating in a gas phase reactor

Development of fixed beds filled with hydrogels for removing water from fuels

Development of niobium oxide-based catalysts: direct conversion of xylose to furfuryl alcohol

Development of Co-W, Ag-Co and Zn-Co electrocatalysts for oxygen reduction/evolution reactions in Li‑O2 and Zn-air batteries

Development of a tool in Excel to estimate the properties of oil and its derivatives

Development of starch-based active films reinforced with coffee husks and poly(limonene) additives

Development of thin films based on polymers and recombinant elastin-type proteins using high-throughput screening methods

Development of hydrogels for removing water from liquid fuels

Development of a catalytic incinerator to reduce the emission of volatile organic compounds into the atmosphere

Development of high-performance hydrogel beds for water removal from liquid fuels

Development of Fe-Ni-W metal alloys for application as corrosion-resistant coatings

Development of liposomes with surface modified by hyaluronic acid for topical application of Pterodon pubescens benth extract

Development of mucoadhesive membranes composed of different proportions of chitosan and alginate for the controlled release of the antineoplastic drug imiquimod

Development of a millireactor for alcoholic fermentation and online monitoring of ethanol concentration using a microfluidic device with a responsive membrane

Development of particles based on sericin and alginate for incorporation of diclofenac sodium and ibuprofen

Development of particles from a blend of sericin and alginate for the incorporation and modified release of anti-inflammatory drugs ketoprofen and naproxen

Development of sericin and alginate particles covalently crosslinked with proanthocyanidins or polyvinyl alcohol for the bioadsorption of gold ions present in aqueous media

Development of a technical-economic process for the production of lignocellulosic butanol via IBE fermentation (isopropanol-butanol-ethanol)

Development of chitosan scaffolds complexed with xanthan for application in periosteum-guided bone tissue regeneration

Development of catalytic systems and electrodes for lithium-air batteries

Development of advanced fermentation technology for the production of n-butanol, isopropanol and ethanol from sugarcane bagasse

Development of fermentation technology for the production of butanol from sugarcane bagasse hemicellulosic hydrolyzate: integrating cell immobilization and repeated fed batch

Development of an artificial neural network model-based predictive control in a second generation continuous fermentation process

Development of a framework for detecting and diagnosing faults in chemical systems based on deep learning: from data exploration to monitoring via graphical interface

Development of a neuro fuzzy mathematical model for predicting the baseline electrical energy consumption of a refrigerated distribution center

Development of a virtual sensor for monitoring the cachaça redistillation process

Development of a computational and experimental system for characterizing emulsions using the ultrasonic spectroscopy technique

Development of software (EVATool) to analyze the performance of black liquor evaporation plants in kraft pulp mills

Development of a 3D navier stokes solver combined with the Gilbert-Johnson-Keerthi distance algorithm for simulating reactive turbulent flow in complex geometries

Development of an adaptive framework for integration of MPC and RTO and its application in a styrene polymerization process

Development of a computational tool for teaching multicomponent distillers

Development of an educational tool aimed at simulating chemical reactors

Development of an ultrasonic technique for estimating the void fraction and flow rate of the dispersed phase of water-air flows

Development of the sugarcane conversion process to ethyl levulinate: a route to a viable biodiesel additive

Development of the thermochemical recycling process for composites reinforced with carbon fibers

Development and evaluation of radially aligned carbon nanotube electrodes for Li-O2 batteries

Development and characterization of active films based on starch, poly(itaconic acid) and poly(limonene)

Development and characterization of chitosan coatings produced by plasma-grafting for antibacterial surfaces

Development and production of customized temporomandibular joint prostheses through computational modeling and additive manufacturing

Development of a PLDLA dressing by electrospinning to prevent keloids

Development, characterization and performance of oxidized hyaluronic acid hydrogels cross-linked with adipic dihydrazine in the proliferation of mezenchymal cells from human adipose tissue

Centrifugal and electrostatic desalination of crude oil

Deterpenation of orange oil using ionic liquids

Experimental determination of operating conditions in a dissolved air flotation (FAD) pilot plant

Experimental determination on the power number of industrial impellers

Lignin dissolution in protic ionic liquids

Effect of acid treatments applied to niobium-based catalysts on catalytic performance in the dehydration reaction of xylose furfural

Pulsed electroplating for the removal and reuse of copper from industrial effluents and the formation of corrosion-resistant NiCu coatings

Use of niobia as a support in catalysts for the hydrogenation of furfural to furfuryl alcohol in liquid phase

Encapsulation of curcumin in PLGA nanoparticles: Techniques aimed at maximizing the preservation of the active ingredient during the production stage

Encapsulation of N,N-dimethyl-meta-toluamide and citronella oil via miniemulsion polymerization

Enrichment of carboxylic and hydroxyl groups in alkaline Kraft lignin fractions obtained by solvent fractionation

Phase equilibrium and miscibility of polymeric blends formed by silk fibroin and sodium alginate

Liquid-liquid equilibrium and thermodynamic modeling to evaluate gamma-valerolactone (GVL) as a green solvent in the extraction of oxygenated solutes

Liquid-liquid equilibrium and protein partitioning in aqueous two-phase systems

Liquid-liquid equilibrium in binary and ternary systems involving glycerol as diluent using gas chromatography

Liquid-vapor equilibrium of binary mixtures involving fatty compounds with OH groups at subatmospheric pressures

Adaptation and cultivation strategies for Rhodotorula toruloides aiming to produce microbial oil from hemicellulosic hydrolysates

Strategies for reducing catalyst concentration in atom transfer radical polymerization: a kinetic study approach by mathematical modeling and simulation

Strategies to improve the performance of enzymatic hydrolysis of sugarcane bagasse at high solids concentrations

Strategies for optimizing second-generation ethanol production by non-conventional yeasts evaluated by mathematical modeling

Strategies for producing high molar mass hyaluronic acid and its purification in activated carbon

Study of the kinetics of formation of the oxide layer in maraging steel (18% Ni)

Study of the chemical, structural and thermal composition of sugarcane bagasse and straw and its pellets considering the fusibility characteristics of its ash

Study of gamma-valerolactone as a green solvent for removing oxygenated compounds

Study of the influence of ozone concentration on the conversion of volatile organic compounds through gas phase photocatalysis with TiO2 and UV light

Study of the influence of input distribution on the selective hydrogenation of diolefins in naphtha via computational fluid dynamics

Study of the influence of sepiolite surface modification on the properties of PBAT nanocomposites

Study of the influence of operating conditions on the gas-solid flow and performance of the FCC riser via CFD and statistical analysis

Study of heat transfer intensification with enhancement devices in shell-and-tube heat exchangers

Study of the modification of poly(lactic acid) with amino functional reactive elastomer

Study of the preparation of Brazilian organomontmorillonite by different organophilization processes with ionic, non-ionic and hybrid systems and its application in PLA nanocomposites

Study of the partial replacement of poly(butylene adipate-co-terephthalate) by whey protein isolate: incorporation of materials from renewable sources in polymer blends

Study of the volumetric properties of binary mixtures containing ionic liquids and alcohols at pressures of up to 40 MPa and temperatures of 298,15; 303,15 and 308,15K

Study of phase equilibrium in protein precipitation: effect of initial concentration and molecular mass

Study of PBAT films for soil coverage (mulching): photodegradation, biodegradation and ecotoxicological effects

Study of the curing behavior, morphology and mechanical properties of epoxy resin nanocomposites with cellulose nanocrystals obtained from microcrystalline cellulose

Study of the chemical and physical behavior of eucalyptus black liquor in the lignin extraction process

Study of the solid-liquid equilibrium of mixtures containing fatty compounds through the use of differential scanning calorimetry

Study of liquid-liquid balance aiming at the deodorization of bioglycerol by solvent extraction

Study of flow in a stirred tank using PIV and CFD

Study of confined hydrogen nanoleak by molecular dynamics simulations

Study of the potential and kinetics of adsorption of hexavalent chromium by fresh green coconut fiber (cocos nucifera)

Study of the curing process and thermophilic properties of epoxy and isophorone diamine modified with plasticizer from renewable source 1,2-isopropylideneglycerol

Study of the residence time of free radicals generated by photolysis in a batch-type photochemical reactor

Study of diffusional aspects in confined media subject to external electrical potentials for application in catalysis via Molecular Dynamics simulations

study of bubble-particle interaction mechanisms in the solid-liquid separation process by dissolved air flotation of industrial effluents

Study of solution and process parameters on the morphology of zno nanofibers obtained by electrospinning and their application in pla nanocomposites by 3d printing

Study and modeling of flame propagation using the BML approach using STOKES

Experimental and theoretical study of the solubility of sodium salts in black liquor in the evaporation process

Exploratory study of the coupling of Rocky/Fluent software - case: pneumatic separation of sugarcane bagasse fractions

study on thermal insulation of expanded nitrile rubber applied to polyethylene water tanks used in low-cost solar collectors

Study on fluidization regimes via Shannon entropy

In vitro and in vivo studies of oral administration of hyaluronic acid in free and nanostructured forms

Ultrasound-assisted extraction of microalgae oil (Scenedesmus sp. LF01) and evaluation of enzymatic routes for the production of functional lipids

Extraction of protein from rice bran: alkaline process, ultrasound and microwave

Fabrication and microstructural characterization of 1st to 3rd generation solid oxide fuel cells

Tools for rapid assessment of ideas for improvements in energy efficiency of chemical processes

Flexibility of vacuum fermentation technology: production of n-butanol and ethanol from eucalyptus

Fluid dynamics of corn straw in a bubbling fluidized bed

Photodegradation of volatile aromatic compounds present in gas streams through the association of a mud bed reactor with photolytic ozonization (UVC/TiO2 + UVC/O3 or UVC/ZnO + UVC/O3)

Photodegradation of dyes from the textile industry: RB 19, RB 21 and RY 145, using heterogeneous catalysis in photoreactors: experimental, mathematical modeling of the systems and optimization

Functionalization of Kraft lignin with quaternary ammonium compound and application in gelatin-based films

Fundamentals of the Mach number-based essentially non-oscillatory weighted scheme

Hydrogenation of furfural to furfuryl alcohol in liquid phase: effects of reaction conditions and reduction method on the performance of Cu, Ru and Pd catalysts supported on alumina

Glycerol hydrogenolysis promoted by substituted hydrotalcites

Hemicellulosic hydrolyzate: detoxification, characterization of phenolic compounds and evaluation of the fermentative process for E2G production

Hydroxyapatite as a catalyst for butanol production: ab initio investigation of ethanol coupling reactions

Identification and simulation of the best technological route for producing Nylon 12

Implementation of the Lattice Boltzmann method in porous media and binary fluid adsorption

Incorporation of the drug valsartan into a blend of sericin and alginate for modified release

Industry 4.0: an overview of digital transformation in the paper and cellulose industries in Brazil

Influence of microdevice geometry on increasing vorticity in fluid flow and implementation of a numerical code based on the simple co-located algorithm

Influence of design parameters on photocatalytic reactors for treating volatile organic compounds

Influence of roughness parameters on multilayer coatings and tumor cell adhesion

Influence of tempol on the stability of hyaluronic acid under stress for applications in regenerative orthopedics

Integration of second generation ethanol and biodiesel production processes

Investigation of biodigestion as a social technology for the recovery of agricultural waste

Investigation of the influence of the physical-chemical and rheological characteristics of oils on the breakdown of emulsions in the electrostatic desalting process

Investigation of the dilution rate in stratified flows: experimental analysis and numerical simulation using OpenFOAM

Investigation of chaotic characteristics in a mixing tank

Investigation of a pseudo-homogeneous model for ammonia synthesis: use of a compositional approach

Investigation of the parastripping process in the deacidification/deodorization stage of palm oil

Experimental and numerical investigation of the effect of the horizontal inclination of the impellers on the mixing time and flow of a tank with side entry agitators

Investigations into reactive turbulent flows - study of puddle fires with the firefoam solver

Investigation of operational conditions for the production of bio-oil and biochar from sugarcane bagasse through simulation and application in a pilot plant

Liquefaction of Wheat Bran for Production of Xylanases by Submerged Cultivation of Aspergillus Niger

Protic ionic liquids obtained from biorefinery byproducts: characterization and determination of liquid-liquid equilibrium data with n-butanol and water

Breeding of Rhodotorula toruloides for phytoene accumulation by gene modification and genome-scale metabolic modeling

Electrospun poly(ethylene oxide) and thrombin membranes for tissue injury repair

Acoustic method and machine learning algorithms applied to detecting and locating leaks in low pressure gas pipes

Tuning methodology for predictive controllers using sensitivity functions

Hazop Methodology based on Fuzzy Set Theory: a semi-quantitative assessment of industrial risk in the process industry

Global optimization methods for chemical equilibrium and adsorption calculations in Fischer Tropsch synthesis

Microfiltration of Streptomyces tsukubaensis fermentation micelles for the production of tacrolimus

3D Microfluidics for the High-Throughput Synthesis of Stealth Podomas and Lipid Nanoparticles Aiming at Gene Therapy and Vaccination

Microfluidics as a technological platform for the production of lipid micro and nanocarriers for nanomedicine applications

Modeling radical polymerization via organocatalyzed atom transfer of methyl methacrylate

Modeling the synthesis of poly(d-limonene) via organocatalyzed atom transfer radical polymerization

Mixture adsorption modeling: an extension of the SAFT-VR Mie Equation of State

Modeling of non-spherical particles: Monte Carlo simulations and equations of state based on perturbation theory

Source term modeling of accidental release of pressurized carbon dioxide

Modeling and numerical implementation of thermodynamic models for predicting the flash point of biofuel and hydrocarbon mixtures

Modeling and simulation of Carbon Black formation in FSP reactors

Modeling and simulation of carbon black production in FSP reactors

Modeling and simulation of ring opening polymerization processes for the production of Poly (L-lactic acid)(PLLA) and Poly-e-Caprolactone(PCL)

Modeling and simulation of polydisperse gas-solid systems: highly charged cyclones

Mathematical modeling of the partial hydrogenation reaction of benzene in liquid phase in the presence of Ru/α-Al2O3 catalysts

Mathematical modeling of heat and mass transfer in shale pyrolysis moving bed

Mathematical modeling and evaluation of enzymatic hydrolysis strategies for sugarcane bagasse at high solids loads

Mathematical modeling to describe 2G ethanol production processes using non-Saccharomyces and genetically modified yeasts

Modeling, simulation and optimization of a fixed bed for anhydrous ethanol production by adsorption

Empirical model of ethanol production dynamics based on LSTM deep learning networks

Surface modifications on polyethylene terephthalate (PET) fabric for applications in the textile industry

Polyacrylamide monoliths derivatized with polyethyleneimine: adsorption of human serum proteins

High-performance environmentally friendly nanomaterials for active packaging and bone tissue engineering

New approach to estimating goals in industrial complexes through mathematical programming combined with total site analysis

Obtaining nanocomposite of poly(vinyl acetate) and nanocellulose without surface treatment via in situ emulsion polymerization

Obtaining zinc oxide nanofibers by electrospinning: study of process conditions for polymeric solutions of cellulose acetate and poly(caprolactin) and the zinc acetate precursor

Obtaining electrospun nanofibers based on poly(vinyl alcohol) and hyaluronic acid for applications in the medical field

Obtaining poly(L-lactic acid) via direct polycondensation: purification and development of electrospun films

Obtaining enantiomeric secnidazole products

Obtaining a correlation for the Nusselt number using Computational Fluid Dynamics (CFD) for a mixing tank with helical coils agitated by two Rushton impellers

Obtaining a correlation for the Nusselt number using Computational Fluid Dynamics (CFD) for a mixing tank with helical coils stirred by two Rushton impellers.

Obtaining and purifying α and ß-amyrin from uvaia (Eugenia pyriformis Cambess) leaves

Opportunities to increase the energy efficiency of the sugar and alcohol production route from sugarcane

Optimization of production and obtaining of levulinic acid from sugarcane bagasse and molasses

Optimization of cooling water systems minimizing energy consumption and loss of volatile products

Optimization of the Rhodosporidium toruloides yeast cultivation medium based on sugarcane bagasse hemicellulosic hydrolyzate through supplementation with glycerol and soy molasses aiming at the production of microbial oil

Optimization of the particle diameter profile in a waste bed for gamma-valerolactone (GVL) separation

PIV optimization in the investigation of turbulent flow in a mixing tank

Toluene oxidation in a bubbling reactor with UV/H2O2 associated with pre-oxidation with ozone for atmospheric pollution control

Partition of humic acids in two-phase systems consisting of NaOH + alcohol + water

Organocatalyzed atom transfer and enhanced deactivation radical polymerizations: a synthesis approach and applications of poly(β-pinene)

Biochemical potential of methane from sugarcane energy and residues from soybeans, corn beans, sorghum and eucalyptus

Prediction of venous thromboembolism recurrence via artificial neural networks

Forecast on the use of active teaching methodologies in higher-level courses

Process for obtaining methyl acetate by reactive distillation

Production of ethyl acetate with reactive distillation

Production of n-butyl acetate via reactive distillation

Production of humic acids by Trichodermareesei from different palm oil residues

Production of lignocellulosic sugars in biorefineries attached to eucalyptus kraft pulp mills: technical-economic analysis and methodology for market selection

Biosurfactant production by the Antarctic yeast Rhodotorula mucilaginosa CRM747

Biosurfactant production by the Antarctic yeast Rhodotorula mucilaginosa CRM747: development of an optimal culture medium and biotechnological application

Production of biosurfactants by bacillus subtilis using waste from orange peel processing and its application in oil removal from contaminated soil

Production of charcoal briquettes through the processing of orange pomace (Citrus sinensis)

Aviation fuel production in biorefineries attached to eucalyptus kraft pulp mills: technical-economic, life cycle assessment and decision making using multiple criteria

Production of furfural from xylose: obtaining kinetic parameters and simulation of the reactive stripping process

Tacrolimus production via fermentation by Streptomyces tsukubaensis

Production and characterization of carbon dioxide hydrates

Production, biochemical characterization and purification of lipases from Metschnikowia Sp. prospected from the Antarctic environment using an aqueous biphasic system

Production, characterization and in vitro evaluation of poly (L-lactic acid) (PLLA) fibrous membranes manufactured by rotospinning for tissue engineering

Production, purification and partial characterization of Penicillium citrinum proteases

Design and technical analysis of sugarcane bagasse gasification for application in biomass-to-liquids routes

Proposition and evaluation of a new configuration of baffles in shell and tube heat exchangers aiming to reduce pressure oscillations: experimental and CFD study

Proposal for new subjects for the chemical engineering course

Prospecting and isolation of the SRM-2AA bacterium from the Brazilian cerrado for the development of a protease production bioprocess

Medium and long-term technological exploration of the use of alternative sources of energy generation

Purification and characterization of Aspergillus terreus VSP-22 protease

P're-purification and characterization of proteases obtained from Bacillus subtilis CBMAI - 1302

Quantification of bioactive compounds from the palm Elaeis guineensis by ultra-high efficiency supercritical fluid chromatography and Fourier transform infrared spectroscopy

Antimicrobial and nanostructured coatings containing chitosan produced by self-assembly technique (layer-by-layer) for textile substrates

Pattern recognition of water-air and oil-air binary flows through images and convolutional neural network

Nickel recovery by electrodeposition to form alloys with tungsten and cobalt

Recovery of the rare earth elements ytterbium and lanthanum in an aqueous medium by biosorption using particles produced from a natural polymeric blend based on sericin, alginate and poly(vinyl alcohol)

Semi-interpenetrated hyaluronic acid and L-PRP fibrin networks for chondrogenic and osteogenic differentiation of human adipose tissue mesenchymal cells

Removal of Cd(II) ions by adsorption and ion exchange on vermiculite

Nickel removal from deactivated electroplating baths through induced co-deposition to form corrosion-resistant Ni-W metal alloys

Removal of the pharmaceutical contaminant losartan potassium from aqueous solution by advanced processes: adsorption with organophilic clay and catalytic oxidation with porous carbon and peroxymonosulfate

Saccharomyces cerevisiae immobilized in calcium alginate and coated with chitosan for bioethanol production

Simulation and evaluation of the performance of a deep green eutectic solvent (DES) and conventional solvents for the removal of acid gases CO2 and H2S from natural gas streams

Simulation and design of an unconventional absorption column for CO2 capture

Numerical simulations and 3D printing of flow distributors for scaling up biodiesel synthesis in millireactors

CaO-catalyzed biodiesel synthesis in sugarcane bagasse biochar matrix

Synthesis of polymeric membranes via electrospinning for biomedical application

Synthesis of peptide-based nanoparticles via microfluidic technology

Synthesis of Poly(Beta-amino ester) nanoparticles for DNA delivery

Synthesis of poly(limonene) and evaluation of its use as an additive in citrus pectin-based films

Synthesis of telechelic carboxy polystyrene via nitroxide-mediated radical polymerization (NMP)

Heat exchanger network synthesis with considerations on equipment design and industrial plant layout

Synthesis of poly(limonene) via organocatalyzed atom transfer radical polymerization

Synthesis and characterization of polyaniline for application in batteries

Synthesis and characterization of conductive polypyrrole polymer and conductive polypyrrole/kaolinite nanocomposite for application in electromagnetic radiation absorbing material

Synthesis via "in situ" polymerization under sonication and characterization of PMMA/fumed silica nanocomposites

Ultrasonic system for determining the velocity profile, void fraction and flow rate of the dispersed phase in a bubble column

Microfluidic systems for incorporation of Small Interfering RNA (SIRNA) into cationic liposomes and transfection of tumor spheroids on the microchip

On the molecular interactions of amino acids and peptides by molecular dynamics simulations

Eutectic solvents: a promising means for the solubilization and valorization of lignin

Heat exchangers: networks and layout in the plant - sequential and simultaneous design with estimated piping and pumping costs

PSA unit for O2 production: computational study

Use of vegetable oils as a carbon source in the fermentation of Streptomyces tsujubaensis to increase tacrolimus production

Use of computational fluid dynamics to evaluate the efficiency of the hydrocyclone in the primary recovery of CO2 and CH4 hydrates produced in a NETmix® reactor

Use of nickel from an effluent to obtain Zn-Ni anticorrosive coatings

"Evaluation of bioethanol production under different oxygen transfer conditions for the yeast Spathaspora passalidarum NRRL Y-27907."